Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
Parametric structureRigid
Side-hinged sachet box dieline
Editable rigid sachet box with a sloping collar, low beside the left-opening cap and higher opposite it to retain small sachets. Example proportions inferred from a packaging photograph; dimensions and construction need a physical trial. A ready-sized preset of the shoulder & neck box — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside80 × 40 × 90 mm
Outside90.1 × 50 × 93.3 mm
Flat blank256.2 × 216.2 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- —
- Inside size
- Length 80 · Width 40 · Height 90 mm
- Size range
- Length 40–400 · Width 40–300 · Height 40–350 mm
- Manufacturing
- 83.8 × 43.8 × 91.5 mm score to score · inside vs outside sizes
- Parts
- 7 parts — Base wrap, Neck wrap, Lid wrap, Base board, Neck board, Lid board, Left paper hinge strip
- Board area
- 0.124 m² · about 12 up on a 720 × 1020 mm sheet
- Default board
- Rigid greyboard 1.5 mm · 1.5 mm caliper
- Board options
- Rigid 2 mmRigid 1.5
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Kiss cut
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (1.5 mm for Rigid greyboard 1.5 mm). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| BottomBase wrap | 90 × 50 | L + 2Tb + p × W + 2Tb + p |
| Front wallBase wrap | 90 × 66.3 | – × H + Tb + p |
| Front rimBase wrap | 90 × 1.8 | – |
| Front turn-inBase wrap | 86.3 × 15 | – |
| Corner ear ×4Base wrap | 15 × 63.5 | – |
| Back wallBase wrap | 90 × 66.3 | – × H + Tb + p |
| Back rimBase wrap | 90 × 1.8 | – |
| Back turn-inBase wrap | 86.3 × 15 | – |
| Left wallBase wrap | 66.3 × 50 | – × H + Tb + p |
| Left rimBase wrap | 1.8 × 50 | – |
| Left turn-inBase wrap | 15 × 46.3 | – |
| Right wallBase wrap | 66.3 × 50 | – × H + Tb + p |
| Right rimBase wrap | 1.8 × 50 | – |
| Right turn-inBase wrap | 15 × 46.3 | – |
| Neck leftNeck wrap | 43.3 × 66.7 | – |
| Neck frontNeck wrap | 83.3 × 76.7 | – |
41 more panels are listed in the editor’s structure step.
Adjustable in the editor
Beyond the size and board, this structure exposes 4 options; the template and 3D preview follow each change.
- Lid opening2 options
- Lid depthmm
- Exposed neck heightmm
- Collar slopemm
The shoulder & neck box family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this side-hinged sachet box yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.