Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
DM-FILM-HDR-01Bags & pouches
Paired raised-header film bag dieline
Original one-web film cut and seal guide: two pierced raised headers above shorter inward side gussets. Content is sealed below the openings; converter and carrying-load approval required. A ready-sized preset of the side-gusset bag — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside200 × 320 mm
Outside200 × 380 mm
Flat blank600 × 380 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- DM-FILM-HDR-01
- Inside size
- Front width 200 · Height 320 mm
- Size range
- Front width 50–400 · Height 100–700 mm
- Manufacturing
- 200 × 380 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.216 m² · about 2 up on a 720 × 1020 mm sheet
- Default board
- White PET / PE laminate · 0.09 mm caliper
- Board options
- Kraft/PEMet PET/PEWhite PET/PEClear PET/PE
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Cut
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes of this DM-FILM-HDR-01 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.09 mm for White PET / PE laminate). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Side fin outer | 10 × 320 | – × H |
| Left front gusset | 45 × 320 | – × H |
| Front and raised handle | 200 × 380 | L × – |
| Right front gusset | 45 × 320 | – × H |
| Right rear gusset | 45 × 320 | – × H |
| Back and raised handle | 200 × 320 | L × H |
| Left rear gusset | 45 × 320 | – × H |
| Side fin inner | 10 × 320 | – × H |
Adjustable in the editor
Beyond the size and board, this structure exposes 12 options; the template and 3D preview follow each change.
- Top construction2 options
- Raised header heightmm
- Header hole widthmm
- Header hole heightmm
- Side gussetmm
- Fin sealmm
- Corners2 options
- Top sealmm
- Bottom sealmm
- Degassing valveon / off
- Tear notcheson / off
- Fill%
The side-gusset bag family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this paired raised-header film bag yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.