Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
DM-TWIN-POCKET-HOLDER-01Display
Twin pen pocket hanger dieline
A hanging backboard with two rolled round pockets and circular bottom flaps, from one blank. A ready-sized preset of the hanging holder with two round pockets — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside140 × 40 × 220 mm
Outside141 × 41 × 221 mm
Flat blank344.1 × 252 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- DM-TWIN-POCKET-HOLDER-01
- Inside size
- Board width 140 · Pocket diameter 40 · Board height 220 mm
- Size range
- Board width 80–500 · Pocket diameter 20–200 · Board height 100–800 mm
- Manufacturing
- 140.5 × 40.5 × 220.5 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.057 m² · about 6 up on a 720 × 1020 mm sheet
- Default board
- SBS white board 350 g · 0.5 mm caliper
- Board options
- SBS 350Kraft 350FBB 400E-flute WSBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes of this DM-TWIN-POCKET-HOLDER-01 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.5 mm for SBS white board 350 g). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Backboard | 140 × 220 | L × H |
| Pocket wall ×24 | 7.3 × 121 | – |
| Pocket bottom ×2 | 32 × 32 | – |
| Glue flap ×2 | 14 × 117 | – |
Adjustable in the editor
Beyond the size and board, this structure exposes 1 option; the template and 3D preview follow each change.
- Pocket heightmm
The hanging holder with two round pockets family
The same structure with sizes, boards and options set for a use.
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this twin pen pocket hanger yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.