Skip to content
DielineMaker
Start designing free

Workspace·6 min read

Dieline to 3D: check a supplier file and fold it

Drop a DXF, SVG or CF2 dieline into the free checker to map its layers, read the checks and fold it, without uploading the file.

Updated Open the dieline checker

Before you start

What goes in
A DXF, SVG or CF2 dieline from your supplier or CAD program.
What comes out
The blank size, panel and fold count, knife length and checks, and a folded preview you can play.

A practical example

Check a supplier’s tuck carton

Drop the file, confirm the unit, make sure cut and crease layers are mapped correctly and read the checks before you ask for changes.

Step-by-step walkthrough

  1. Open the tool and sign in

    Open the tool page. You may be asked to sign in first. The file is read on your device and not uploaded.

  2. Drop the file

    Drop a DXF, SVG or CF2 file on the area marked Dieline file, or click it to choose one. To look around first, use SVG sample or DXF sample.

  3. Confirm the unit

    The summary shows the format and the units. When the unit was assumed, or when you change it, set “The numbers in this file are” so the blank comes out the right size.

  4. Map the layers

    Under Layers → line types, each layer has a menu. Set cut, crease, perforation, glue or ignore for each one. Fix any that are wrong and watch the preview and counts update.

  5. Read the checks

    Compare the Blank size, Panels, Knife (cut) and Folded size readouts with the supplier’s drawing, then read the list of Checks for open outlines, gaps and doubled lines.

  6. Fold it

    Press Play the fold or drag the Fold the dieline slider to see the folded preview. It folds at the importer’s default angles, so a crash-lock or roll-over fold may need its angles set in the editor.

  7. Continue in the editor

    Choose Fold it in the 3D studio to open the editor, then use Print setup → Size → Import PDF, AI, DXF, SVG or CF2 with the same file to set every fold, add artwork and export.

Options at a glance

Control or choiceWhat it changesHow to use it well
Dieline fileThe DXF, SVG or CF2 file to check, or a built-in SVG or DXF sample.Use the supplier’s original file.
The numbers in this file areThe unit used to read the file’s coordinates.Confirm it against a dimension you know.
Layers → line typesWhat each layer of the file becomes.Map by what the lines do, not by their colour alone.
Readouts and checksBlank size, panels, knife length and a list of problems found.Use them to question the file before tooling is made.

Detailed control reference

Find the control, understand its effect, and choose it for the job you are making. Available controls depend on the selected structure, object, workspace and output.

Dieline to 3D page → Dieline file

Dieline file

A drop area that reads a DXF, SVG or CF2 file on your device. SVG sample and DXF sample load built-in examples.

When it helps most
Drop the supplier’s file as it is.
Impact and trade-offs
Nothing is sent to a server.

Dieline to 3D page → summary → unit menu

The numbers in this file are

Chooses how the file’s coordinates are turned into millimetres.

When it helps most
Set it when the file did not say or said the wrong unit.
Impact and trade-offs
A wrong unit gives a blank the wrong size while the shape still looks fine.

Dieline to 3D page → Layers → line types

Layers → line types

A menu for every layer or colour group chooses what it becomes, including Ignore.

When it helps most
Map the knife, creases, perforations and glue areas, and ignore dimensions and notes.
Impact and trade-offs
A wrong mapping makes missing or extra panels and folds.

Dieline to 3D page → readouts

Blank size, Panels and Knife (cut)

Shows the flat size, the panel, fold and piece counts, and the cut and crease lengths.

When it helps most
Compare them with the supplier’s drawing.
Impact and trade-offs
A difference means the mapping, unit or file needs another look.

Dieline to 3D page → Checks

Checks

Lists problems such as open outlines, gaps and doubled lines, with a pass or attention status in the header.

When it helps most
Fix the file at the source when a check fails.
Impact and trade-offs
The checker welds tiny gaps and tells you; it does not repair meaningful mistakes.

Dieline to 3D page → folded preview → Play the fold and Fold the dieline slider

Fold the dieline

Animates the folded shape between flat and folded.

When it helps most
Scrub partway through to see how panels move.
Impact and trade-offs
The preview uses default fold angles, not your supplier’s own.

Dieline to 3D page → below the readouts

Fold it in the 3D studio

Opens the editor so you can import the same file and set angles, add artwork and export.

When it helps most
Continue there once the checks look right.
Impact and trade-offs
You pick the file again in the editor; the checker does not hand it over.

What a clean file looks like

One closed knife outline, creases on their own layer or colour, perforations on a third, real units and no outlined text on the die layers. Doubled lines can cut twice, so the importer merges hairline doubles and reports them.

Checker or editor

Use the checker to diagnose a file quickly. Use the editor to set fold angles, change panels, add artwork and export. See the supplier dielines guide for the editor’s import steps, including what the DXF import reports as skipped.

Check your work

  • The unit is correct and the blank size matches the supplier’s drawing.
  • Cut, crease, perforation and glue layers are mapped correctly.
  • The panel and fold counts match the real structure.
  • No check is left unexplained.

Troubleshooting

The blank is tiny or enormous

Change “The numbers in this file are” and compare with a known dimension.

No panels are found

Look for an open knife outline or a wrong layer mapping, and clean the source file.

The folded preview looks wrong

The checker folds at default angles. Import the file in the editor and set the root panel and each fold.