Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
ECMA E22.20.00.00Carriers
6-bottle wrap 3×2, neck covered 183×122×232 dieline
Six bottles in two rows: bevelled base, neck locks and two finger holes. A ready-sized preset of the bottle wrap-around multipack — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside183 × 122 × 232 mm
Outside183 × 122.9 × 233.4 mm
Flat blank751.6 × 183 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- ECMA E22.20.00.00
- Inside size
- Length (A) 183 · Width (B) 122 · Height 232 mm
- Size range
- Length (A) 60–600 · Width (B) 40–300 · Height 60–400 mm
- Manufacturing
- 183 × 122.5 × 232.5 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.138 m²
- Default board
- Kraft board 350 g · 0.46 mm caliper
- Board options
- Kraft 350SBS 350GD2 350FBB 400SBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes of this ECMA E22.20.00.00 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.46 mm for Kraft board 350 g). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Glue lap | 11 × 183 | – × L |
| Inner bottom | 77 × 183 | – × L |
| Bevel ×2 | 9 × 183 | – × L |
| Side ×2 | 226.1 × 183 | – × L |
| Top | 134.7 × 183 | – × L |
| Bottom | 71 × 183 | – × L |
| Can-top lock ×6 | 45 × 20.1 | – |
Adjustable in the editor
Beyond the size and board, this structure exposes 9 options; the template and 3D preview follow each change.
- Construction5 options
- Bottles per rowcount
- Heel locks5 options
- Heel lock lengthmm
- Heel lock depthmm
- Neck lock depthmm
- Bottom bevelmm
- Shoulder bevelmm
- Finger holes4 options
The bottle wrap-around multipack family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this 6-bottle wrap 3×2, neck covered 183×122×232 yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.