Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
DM-DRAWER-LATCH-01Trays & lids
Drawer box with end latches dieline
Two sleeve end flaps engage protected receiver pockets in the tray. Release both before sliding; add an optional oval display window. A ready-sized preset of the drawer box — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside180 × 120 × 40 mm
Outside183.5 × 136.5 × 42.3 mm
Flat blank262 × 319 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- DM-DRAWER-LATCH-01
- Inside size
- Width 180 · Depth 120 · Height 40 mm
- Size range
- Width 30–500 · Depth 30–500 · Height 10–200 mm
- Manufacturing
- 181 × 134 × 40.5 mm score to score · inside vs outside sizes
- Parts
- 2 parts — Sleeve, Tray
- Board area
- 0.137 m² · about 6 up on a 720 × 1020 mm sheet
- Default board
- SBS white board 350 g · 0.5 mm caliper
- Board options
- SBS 350FBB 400Kraft 350Black 350SBS 300GD2 350F-fluteE-flute WSBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes of this DM-DRAWER-LATCH-01 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.5 mm for SBS white board 350 g). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Pose rigSleeve | 100 × 62.6 | – |
| BottomSleeve | 100 × 199.1 | L + 7T + 2c × W + T |
| Left sideSleeve | 42.3 × 136.5 | H + 2.5T + c × W + T |
| TopSleeve | 183.5 × 136.5 | L + 7T + 2c × W + T |
| Right sideSleeve | 41.8 × 136.5 | H + 1.5T + c × W + T |
| Glue flapSleeve | 12 × 136.5 | – |
| Front release flapSleeve | 119.3 × 19.5 | – |
| Receiver tongue ×2Sleeve | 24 × 5 | – |
| Rear release flapSleeve | 119.3 × 19.5 | – |
| Pose rigTray | 100 × 80.4 | – |
| BaseTray | 100 × 80.4 | – |
| FrontTray | 180 × 40.5 | – |
| BackTray | 180 × 40.5 | – |
| Left endTray | 40.5 × 134 | – |
| Right endTray | 40.5 × 134 | – |
| Receiver corner glue ear ×4Tray | 6 × 39.5 | – |
5 more panels are listed in the editor’s structure step.
Adjustable in the editor
Beyond the size and board, this structure exposes 6 options; the template and 3D preview follow each change.
- Drawer closure2 options
- Tongue widthmm
- Oval sleeve windowon / off
- Striking strip3 options
- Striker widthmm
- Food contacton / off
The drawer box family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this drawer box with end latches yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.