Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
DM-DRAWER-BOX-01Trays & lids
Soap drawer dieline
Kraft sleeve and tray for a 100 g bar of soap. A ready-sized preset of the drawer box — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside95 × 65 × 35 mm
Outside99.7 × 65.9 × 37.1 mm
Flat blank167.8 × 135.9 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- DM-DRAWER-BOX-01
- Inside size
- Width 95 · Depth 65 · Height 35 mm
- Size range
- Width 30–500 · Depth 30–500 · Height 10–200 mm
- Manufacturing
- 97.3 × 65.5 × 35.2 mm score to score · inside vs outside sizes
- Parts
- 2 parts — Sleeve, Tray
- Board area
- 0.041 m² · about 28 up on a 720 × 1020 mm sheet
- Default board
- Kraft board 350 g · 0.46 mm caliper
- Board options
- SBS 350FBB 400Kraft 350Black 350SBS 300GD2 350F-fluteE-flute WSBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Reverse crease
- Crease
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes of this DM-DRAWER-BOX-01 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.46 mm for Kraft board 350 g). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| BottomSleeve | 99.2 × 65.5 | L + 7T + 2c × W + T |
| Left sideSleeve | 36.7 × 65.5 | H + 2.5T + c × W + T |
| TopSleeve | 99.2 × 65.5 | L + 7T + 2c × W + T |
| Right sideSleeve | 36.2 × 65.5 | H + 1.5T + c × W + T |
| Glue flapSleeve | 12 × 65.5 | – × W + T |
| Pose rigTray | 100 × 40 | – |
| BaseTray | 100 × 40 | – |
| FrontTray | 97.3 × 35.2 | – × H + T/2 |
| BackTray | 97.3 × 35.2 | – × H + T/2 |
| Left endTray | 35.2 × 65.5 | H + T/2 × W + T |
| Right endTray | 35.2 × 65.5 | H + T/2 × W + T |
| Corner web ×4Tray | 32.3 × 35.2 | – × H + T/2 |
| Corner web ×4Tray | 45.6 × 24.9 | – |
Adjustable in the editor
Beyond the size and board, this structure exposes 6 options; the template and 3D preview follow each change.
- Drawer closure2 options
- Pull4 options
- Notch radiusmm
- Striking strip3 options
- Striker widthmm
- Food contacton / off
The drawer box family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this soap drawer yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.