Skip to content
DielineMaker
Start designing free
Double-wall Brightwood tray
Preview image

The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.

ECMA B48.20.00.00Trays & lids

ECMA B48.20.00.00 double-wall Brightwood tray dieline

Machine-glued Brightwood tray with four double walls: side-panel glue flaps inside the outer end panels, inner panels glued over them. 9 × 6 × 2 in. A ready-sized preset of the glued folding-carton tray — change the length, width and height and every panel, tuck and glue flap is redrawn to match.

Inside229 × 152 × 51 mm
Outside232.5 × 154.5 × 51.8 mm
Flat blank435 × 357 mm
Download the dielinePro
Flat dieline preview

Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans

Reference
ECMA B48.20.00.00
Structure
Glued folding-carton tray
Inside size
Inside length (A) 229 · Inside width (B) 152 · Inside height 51 mm
Size range
Inside length (A) 80–700 · Inside width (B) 60–550 · Inside height 15–200 mm
Manufacturing
231.5 × 153.5 × 51.3 mm score to score · inside vs outside sizes
Parts
One blank
Board area
0.124 m²
Default board
SBS white board 350 g · 0.5 mm caliper
Board options
SBS 300SBS 350FBB 400Kraft 350F-fluteSBS 18 pt
Good for
brightwood traydouble wall traymachine glued trayecma trayglued paperboard traycollapsible traydouble wallhinged coverecma b48.20.00.00

The flat dieline

Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.

  • Crease
  • Cut
  • Glue area
  • Bleed 3 mm
Double-wall Brightwood tray flat dieline with cut and crease lines

On a production sheet

Exact engine layout at the stated default dimensions: 229 × 152 × 51 mm. Stock 1020 × 720 mm, grain along width; 12 mm gripper, 10 mm tail, 6 mm sides, 5 mm gutter and 3 mm bleed. Grain rotation, automatic layout. Each part is nested separately.

2 per sheet · ECMA tray blank
2 copies of ECMA tray blank on the stock sheet

Not proven optimal: upper bound 3 ups, within 1 up (33.3 %).

Open in editor with this sheet

How it folds

The double-wall brightwood tray erects in 3 steps, in the order the creases are scored to take. The editor plays the same sequence in 3D and lights each step’s creases on the dieline.

  1. 1
    Fold the walls upTray wall and 3 more
  2. 2
    Fold the corner ears inCorner glue flap and 3 more
  3. 3
    Fold the inner walls inGlued inner wall and 3 more
BottomBack · 1Glued inner wall · 3Right · 1Glued inner wall · 3Front · 1Glued inner wall · 3Left · 1Glued inner wall · 3
Each panel at its place on the blank, numbered by the step that folds it. Grey panels stay flat: the base, or the face the rest folds around.

How the blank is sized

Score-to-score panel sizes of this ECMA B48.20.00.00 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.5 mm for SBS white board 350 g). Change the size or board in the editor and every panel is recalculated.

PanelSize (mm)Formula
Tray floor231.5 × 153.5–
Tray wall ×2231.5 × 51.3– × H + T/2
Glued inner wall ×2230.5 × 50.5– × H − T
Tray wall ×251.3 × 153.5H + T/2 × –
Glued inner wall ×250.5 × 152.5H − T × W + T
Corner glue flap ×451.3 × 50.3– × H − 1.5T

Adjustable in the editor

Beyond the size and board, this structure exposes 2 options; the template and 3D preview follow each change.

  • Construction10 options
  • Wall return depthmm

The glued folding-carton tray family

The same structure with sizes, boards and options set for a use.

Before you choose this template

Size, materials, downloads and production checks.

Will the double-wall brightwood tray dieline fit my product?

Machine-glued Brightwood tray with four double walls: side-panel glue flaps inside the outer end panels, inner panels glued over them. 9 × 6 × 2 in. The default dimensions in inside-size mode are Inside length (A) 229 mm, Inside width (B) 152 mm, Inside height 51 mm. Measure your product and any inserts or wrapping, then set the template size. Check a physical sample with your contents before ordering production.

Can I change the size and design?

Yes. The supported ranges are Inside length (A) 80–700 mm, Inside width (B) 60–550 mm, Inside height 15–200 mm. At the default settings, the editor also exposes Construction, Wall return depth. Add your own artwork and preview the result in 3D. The template geometry is rebuilt when its dimensions change.

Which materials can I choose?

The default is SBS white board 350 g (0.5 mm caliper). This structure allows SBS white board 300 g, SBS white board 350 g, Folding boxboard 400 g, Kraft board 350 g, F-flute micro corrugated, SBS white board 18 pt. Select the stock before checking fit, and ask your converter to confirm the grade and caliper for the intended product.

Which files can I download?

The template page offers dimensioned PDF, Illustrator (.ai via script), layered SVG and DXF cutting and crease geometry. After adding artwork in the editor, you can export a print-ready PDF and review the bleed, safe areas and dieline layers with your printer.

Is this dieline free?

Browsing the previews is free, and you can customize the template after signing in with Google. Template and print-file downloads require a Pro or Business plan. The Free plan allows one eligible download every 8 hours; free mockups, renders and videos carry a watermark. See the pricing page for the current plans.

Can I send the download straight to production?

Use the file as a starting point for a printer or converter review. Confirm the finished dimensions, stock, crease and cutting setup, assembly, bleed and artwork, then approve a physical sample. The 3D preview does not test strength, transit performance or suitability for particular contents.

Compare plans and downloads

Similar structures

Other structures built in a similar way, matched on code family, category, closures and proportions.

All trays & lids templates

Make this double-wall brightwood tray yours

Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.