Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
Parametric structureShapes
45° pipe elbow section dieline
A rolled paper tube with independently angled end cuts and twist between their directions. The developed cuts are sampled sinusoids; the preview uses matching virtual facets. A ready-sized preset of the mitered paper cylinder — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
InsideØ 80 × 160 mm
OutsideØ 80.3 × 160 mm
Flat blank261.8 × 200.1 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- —
- Inside size
- Inside diameter 80 · Axis length 160 mm
- Size range
- Inside diameter 20–500 · Axis length 20–700 mm
- Manufacturing
- Ø 80.2 × 160 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.042 m² · about 8 up on a 720 × 1020 mm sheet
- Default board
- Art paper 170 g · 0.16 mm caliper
- Board options
- Paper 170SBS 300SBS 350Kraft 350SBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.16 mm for Art paper 170 g). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Curved tube wall ×2 | 3.9 × 134.6 | – |
| Curved tube wall ×2 | 3.9 × 137.7 | – |
| Curved tube wall ×2 | 3.9 × 141.1 | – |
| Curved tube wall ×2 | 3.9 × 144.7 | – |
| Curved tube wall ×2 | 3.9 × 148.4 | – |
| Curved tube wall ×2 | 3.9 × 152.2 | – |
| Curved tube wall ×2 | 3.9 × 156.1 | – |
| Curved tube wall ×2 | 3.9 × 160 | – × H |
| Curved tube wall ×2 | 3.9 × 163.9 | – |
| Curved tube wall ×2 | 3.9 × 167.8 | – |
| Curved tube wall ×2 | 3.9 × 171.6 | – |
| Curved tube wall ×2 | 3.9 × 175.3 | – |
| Curved tube wall ×2 | 3.9 × 178.9 | – |
| Curved tube wall ×2 | 3.9 × 182.3 | – |
| Curved tube wall ×2 | 3.9 × 185.4 | – |
| Curved tube wall ×2 | 3.9 × 188.3 | – |
20 more panels are listed in the editor’s structure step.
Adjustable in the editor
Beyond the size and board, this structure exposes 5 options; the template and 3D preview follow each change.
- Top miter angle°
- Bottom miter angle°
- End-plane twist°
- Glue flap sizemm
- Glue flap countcount
The mitered paper cylinder family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this 45° pipe elbow section yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.