Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
Parametric structureShapes
Straight paper tube dieline
A rolled paper tube with independently angled end cuts and twist between their directions. The developed cuts are sampled sinusoids; the preview uses matching virtual facets. A ready-sized preset of the mitered paper cylinder — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
InsideØ 90 × 180 mm
OutsideØ 90.3 × 180 mm
Flat blank293.3 × 180 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- —
- Inside size
- Inside diameter 90 · Axis length 180 mm
- Size range
- Inside diameter 20–500 · Axis length 20–700 mm
- Manufacturing
- Ø 90.2 × 180 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.053 m² · about 10 up on a 720 × 1020 mm sheet
- Default board
- Art paper 170 g · 0.16 mm caliper
- Board options
- Paper 170SBS 300SBS 350Kraft 350SBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.16 mm for Art paper 170 g). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Curved tube wall ×64 | 4.4 × 180 | – × H |
| Joining seam tab ×2 | 4.4 × 180 | – × H |
| Joining seam tab | 1.1 × 180 | – |
Adjustable in the editor
Beyond the size and board, this structure exposes 5 options; the template and 3D preview follow each change.
- Top miter angle°
- Bottom miter angle°
- End-plane twist°
- Glue flap sizemm
- Glue flap countcount
The mitered paper cylinder family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this straight paper tube yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.