Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
Parametric structureShapes
Rhombus jewellery box dieline
A diamond-plan tray with four oblique corners and a separate fitted lid. Wall panels fold from each cap and hand-glued corner tabs close the sides. A ready-sized preset of the rhombus tray & lid — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside90 × 130 × 24 mm
Outside91 × 131 × 25 mm
Flat blank135.4 × 167.2 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- —
- Inside size
- Width 90 · Length 130 · Height 24 mm
- Size range
- Width 80–350 · Length 80–350 · Height 20–100 mm
- Manufacturing
- 90.5 × 130.5 × 24.5 mm score to score · inside vs outside sizes
- Parts
- 2 parts — Rhombus tray & lid lid, Rhombus tray & lid base tray
- Board area
- 0.024 m² · about 33 up on a 720 × 1020 mm sheet
- Default board
- SBS white board 350 g · 0.5 mm caliper
- Board options
- SBS 350FBB 400Kraft 350Black 350SBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.5 mm for SBS white board 350 g). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Rhombus tray & lid lidRhombus tray & lid lid | 41.7 × 100 | – |
| Rhombus tray & lid wall ×4Rhombus tray & lid lid | 10 × 81.9 | – |
| Corner glue tab ×4Rhombus tray & lid lid | 6 × 3 | – |
| Pose rigRhombus tray & lid lid | 35 × 100 | – |
| Rhombus tray & lid floorRhombus tray & lid base tray | 90.6 × 130.9 | – |
| Rhombus tray & lid wall ×4Rhombus tray & lid base tray | 24.5 × 79.6 | H + T × – |
| Corner glue tab ×4Rhombus tray & lid base tray | 15.4 × 7.4 | – |
Adjustable in the editor
Beyond the size and board, this structure exposes 1 option; the template and 3D preview follow each change.
- Lid depthmm
The rhombus tray & lid family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this rhombus jewellery box yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.