Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
ECMA F60.41.00.00Tuck end
Carton with one-row separator dieline
Saw-tooth separator holding a row of tubes, pens or vials across the carton. A ready-sized preset of the carton with integral separator — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside150 × 45 × 100 mm
Outside151 × 46 × 101 mm
Flat blank404 × 220.5 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- ECMA F60.41.00.00
- Inside size
- Length (A) 150 · Depth (B) 45 · Height 100 mm
- Size range
- Length (A) 50–400 · Depth (B) 15–200 · Height 30–300 mm
- Manufacturing
- 150.5 × 45.5 × 100.5 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.069 m² · about 6 up on a 720 × 1020 mm sheet
- Default board
- SBS white board 350 g · 0.5 mm caliper
- Board options
- SBS 350FBB 400GD2 350Kraft 350SBS 300SBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes of this ECMA F60.41.00.00 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.5 mm for SBS white board 350 g). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Front | 150.5 × 100.5 | L + T × H + T |
| Left end | 45.5 × 100.5 | W + T × H + T |
| Back | 150.5 × 100.5 | L + T × H + T |
| Right end | 45.5 × 100.5 | W + T × H + T |
| Separator base | 18.1 × 43.5 | – |
| Separator tooth face ×4 | 8.8 × 42 | – |
| Separator tooth slope ×4 | 23.8 × 42 | – |
| Glue flap | 12 × 99.5 | – × H − T |
| Top closure | 150.5 × 45 | L + T × W |
| Tuck ×2 | 149.5 × 15 | L − T × – |
| Top dust flap ×2 | 45.5 × 30.3 | W + T × – |
| Bottom closure | 150.5 × 45 | L + T × W |
| Bottom dust flap ×2 | 45.5 × 30.3 | W + T × – |
Adjustable in the editor
Beyond the size and board, this structure exposes 4 options; the template and 3D preview follow each change.
- Separator2 options
- Separator countcount
- Tuck depthmm
- Slit lockon / off
The carton with integral separator family
The same structure with sizes, boards and options set for a use.
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this carton with one-row separator yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.