Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
ECMA F60.42.00.00Tuck end
Carton with two rows of retained partitions dieline
Two integral partition strips form five cells per row around a double centre spine. A ready-sized preset of the carton with integral separator — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside160 × 50 × 90 mm
Outside161 × 51 × 91 mm
Flat blank622.5 × 244.5 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- ECMA F60.42.00.00
- Inside size
- Length (A) 160 · Depth (B) 50 · Height 90 mm
- Size range
- Length (A) 50–400 · Depth (B) 15–200 · Height 30–300 mm
- Manufacturing
- 160.5 × 50.5 × 90.5 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.093 m² · about 3 up on a 720 × 1020 mm sheet
- Default board
- SBS white board 350 g · 0.5 mm caliper
- Board options
- SBS 350FBB 400GD2 350Kraft 350SBS 300SBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes of this ECMA F60.42.00.00 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.5 mm for SBS white board 350 g). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Front | 160.5 × 90.5 | L + T × H + T |
| Left end | 50.5 × 90.5 | W + T × H + T |
| Back | 160.5 × 90.5 | L + T × H + T |
| Right end | 50.5 × 90.5 | W + T × H + T |
| Top closure | 160.5 × 50 | L + T × W |
| Tuck ×2 | 159.5 × 15 | L − T × – |
| Top dust flap ×2 | 50.5 × 20.2 | W + T × – |
| Bottom closure | 160.5 × 50 | L + T × W |
| Bottom dust flap ×2 | 50.5 × 20.2 | W + T × – |
| Front wall return | 128.4 × 87.5 | – |
| Front row partition | 24.3 × 65.6 | – |
| Front row partition ×2 | 24.3 × 21.9 | – |
| Front row partition | 24.3 × 43.8 | – |
| Front row centre spine | 128.4 × 43.8 | – |
| Centre spine end glue | 15.8 × 87.5 | – |
| Back wall return | 160.5 × 44.5 | L + T × – |
3 more panels are listed in the editor’s structure step.
Adjustable in the editor
Beyond the size and board, this structure exposes 5 options; the template and 3D preview follow each change.
- Separator2 options
- Separator construction2 options
- Separator countcount
- Tuck depthmm
- Slit lockon / off
The carton with integral separator family
The same structure with sizes, boards and options set for a use.
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this carton with two rows of retained partitions yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.