Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
Parametric structureBags & pouches
Small puree spout pouch dieline
85 × 135 mm starting dimensions. Adjust to your actual container or product. A ready-sized preset of the spout pouch — change its size and the cut outline, bleed and safe area are redrawn to match.
Inside85 × 135 mm
Outside85 × 135 mm
Flat blank85 × 135 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- —
- Inside size
- Width 85 · Height 135 mm
- Size range
- Width 60–320 · Height 90–450 mm
- Manufacturing
- 85 × 135 mm score to score · inside vs outside sizes
- Parts
- 3 parts — Front web, Back web, Bottom gusset
- Board area
- 0.026 m² · about 55 up on a 720 × 1020 mm sheet
- Default board
- Metallised PET / PE laminate · 0.09 mm caliper
- Board options
- Met PET/PEWhite PET/PEClear PET/PEKraft/PE
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Cut
- Bleed 3 mm
Adjustable in the editor
Beyond the size and board, this structure exposes 10 options; the template and 3D preview follow each change.
- Spout position2 options
- Bottom construction3 options
- Spout diametermm
- Bottom gussetmm
- Corner cutmm
- Cap diametermm
- Cap heightmm
- Cap colour10 options
- Hang / carry hole7 options
- Fill%
The spout pouch family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this small puree spout pouch yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.