Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
Parametric structureFood
Wrap clamshell — Burger clamshell dieline
Editable 210 × 110 × 70 mm starting point using burger clamshell. Adjust the dimensions to your product before prototyping. A ready-sized preset of the burger clamshell — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside210 × 110 × 70 mm
Outside210.9 × 110.9 × 70.9 mm
Flat blank278 × 354 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- —
- Inside size
- Length 210 · Width 110 · Height 70 mm
- Size range
- Length 60–260 · Width 60–220 · Height 36–150 mm
- Manufacturing
- 210.4 × 110.5 × 70.5 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.087 m² · about 4 up on a 720 × 1020 mm sheet
- Default board
- Food SBS, PE-coated 300 g · 0.45 mm caliper
- Board options
- Food SBS PEFood kraft PESBS 350Kraft 350SBS 300F-fluteE-flute KE-flute WSBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.45 mm for Food SBS, PE-coated 300 g). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Base | 193.3 × 93.3 | – |
| Front | 193.3 × 42.4 | – |
| Back | 193.3 × 42.4 | – |
| Left side | 42.4 × 93.3 | – |
| Right side | 42.4 × 93.3 | – |
| Lid back | 210.9 × 30.1 | L + 2T × – |
| Lid top | 198.4 × 98.4 | – |
| Lid front | 198.4 × 30.1 | – |
| Lid left | 30.1 × 98.4 | – |
| Lid right | 30.1 × 98.4 | – |
| Glue ear ×4 | 22 × 40.4 | – |
| Glue ear ×4 | 22 × 27.9 | – |
| Lock flap | 48 × 12.4 | – |
| Lock tongue | 40 × 4.9 | – |
Adjustable in the editor
Beyond the size and board, this structure exposes 7 options; the template and 3D preview follow each change.
- Wall taper°
- Lid depthmm
- Closure3 options
- Tongue widthmm
- Slit depthmm
- Vents per sidecount
- Lid windowon / off
The burger clamshell family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this wrap clamshell — burger clamshell yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.