Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
ECMA F60.01.00.00Tuck end
Glued-end carton with tuck lid dieline
Double glued ends and a tuck-in lid, e.g. a shoe or garment box. A ready-sized preset of the double-end flat carton — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside300 × 180 × 100 mm
Outside303 × 181 × 101 mm
Flat blank662 × 732.3 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- ECMA F60.01.00.00
- Inside size
- Length (A) 300 · Depth (B) 180 · Height 100 mm
- Size range
- Length (A) 40–600 · Depth (B) 20–400 · Height 20–400 mm
- Manufacturing
- 302.5 × 180.5 × 100.5 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.336 m² · about 1 up on a 720 × 1020 mm sheet
- Default board
- SBS white board 350 g · 0.5 mm caliper
- Board options
- SBS 350FBB 400GD2 350Kraft 350E-flute WE-flute KSBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes of this ECMA F60.01.00.00 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.5 mm for SBS white board 350 g). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Base | 302.5 × 180.5 | L + 5T × W + T |
| Front wall | 302.5 × 100.5 | L + 5T × H + T |
| Back wall | 302.5 × 100.5 | L + 5T × H + T |
| Lid | 302.5 × 180.5 | L + 5T × W + T |
| Tuck flap | 299 × 20 | L − 2T × – |
| Base end flap ×2 | 99 × 179.5 | H − 2T × W − T |
| Back end flap ×2 | 179.8 × 99.5 | W − T/2 × H − T |
| Outer end flap ×2 | 179.8 × 100.5 | W − T/2 × H + T |
| Top end flap ×2 | 178.3 × 150.3 | – |
Adjustable in the editor
Beyond the size and board, this structure exposes 3 options; the template and 3D preview follow each change.
- Construction5 options
- Top end flapsmm
- Tuck depthmm
The double-end flat carton family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this glued-end carton with tuck lid yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.