Skip to content
DielineMaker
Start designing free
Three-compartment keepsake insert 236×126×45
Preview image

The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.

ECMA F80.21.00.00Trays & lids

Three-compartment keepsake insert 236×126×45 dieline

Three equal compartments that drop into a 240 × 130 mm keepsake box, for three small gifts side by side. A ready-sized preset of the folded compartment insert — change the length, width and height and every panel, tuck and glue flap is redrawn to match.

Inside236 × 126 × 45 mm
Outside237.2 × 127.2 × 45 mm
Flat blank1319.6 × 45 mm
Download the dielinePro
Flat dieline preview

Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans

Reference
ECMA F80.21.00.00
Structure
Folded compartment insert
Inside size
Length 236 · Width 126 · Height 45 mm
Size range
Length 40–600 · Width 30–400 · Height 20–400 mm
Manufacturing
236.6 × 126.6 × 45 mm score to score · inside vs outside sizes
Parts
One blank
Board area
0.059 m²
Default board
Folding boxboard 400 g · 0.6 mm caliper
Board options
SBS 350Kraft 350FBB 400GD2 350F-fluteE-flute KE-flute WSBS 18 pt
Good for
souvenir inserthajj giftkeepsaketriothree compartmentscompartment insertdivider insertfolded dividerone piece dividercarton insert

The flat dieline

Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.

  • Crease
  • Cut
  • Glue area
  • Bleed 3 mm
Three-compartment keepsake insert 236×126×45 flat dieline with cut and crease lines

On a production sheet

Exact engine layout at the stated default dimensions: 236 × 126 × 45 mm. Stock 1020 × 720 mm, grain along width; 12 mm gripper, 10 mm tail, 6 mm sides, 5 mm gutter and 3 mm bleed. Grain rotation, automatic layout. Each part is nested separately.

0 per sheet · Compartment insert
0 copies of Compartment insert on the stock sheet

The blank (1319.6 × 45 mm) is larger than this sheet’s knife area (1008 × 698 mm).

Proven: no layout can fit this blank on this sheet with these margins and rotations.

Open in editor with this sheet

How it folds

The three-compartment keepsake insert 236×126×45 erects in 3 steps, in the order the creases are scored to take. The editor plays the same sequence in 3D and lights each step’s creases on the dieline.

  1. 1
    Fold the flapsSpacer, Divider, Glue flap and 2 more
  2. 2
    Fold the walls upEnd wall, Side wall
  3. 3
    Fold the walls upEnd wall
Left · 3FrontRight · 2Back · 2Spacer · 1Divider · 1Spacer · 1Divider · 1Glue flap · 1
Each panel at its place on the blank, numbered by the step that folds it. Grey panels stay flat: the base, or the face the rest folds around.

How the blank is sized

Score-to-score panel sizes of this ECMA F80.21.00.00 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.6 mm for Folding boxboard 400 g). Change the size or board in the editor and every panel is recalculated.

PanelSize (mm)Formula
End wall ×2126.6 × 45W + T × H
Side wall236.6 × 45L + T × H
Side wall236 × 45L × H
Spacer ×242 × 45– × H
Divider ×2234.8 × 45L − 2T × H
Glue flap40.2 × 45– × H

Adjustable in the editor

Beyond the size and board, this structure exposes 1 option; the template and 3D preview follow each change.

  • Compartments2 options

The folded compartment insert family

The same structure with sizes, boards and options set for a use.

Before you choose this template

Size, materials, downloads and production checks.

Will the three-compartment keepsake insert 236×126×45 dieline fit my product?

Three equal compartments that drop into a 240 × 130 mm keepsake box, for three small gifts side by side. The default dimensions in inside-size mode are Length 236 mm, Width 126 mm, Height 45 mm. Measure your product and any inserts or wrapping, then set the template size. Check a physical sample with your contents before ordering production.

Can I change the size and design?

Yes. The supported ranges are Length 40–600 mm, Width 30–400 mm, Height 20–400 mm. At the default settings, the editor also exposes Compartments. Add your own artwork and preview the result in 3D. The template geometry is rebuilt when its dimensions change.

Which materials can I choose?

The default is Folding boxboard 400 g (0.6 mm caliper). This structure allows SBS white board 350 g, Kraft board 350 g, Folding boxboard 400 g, Grey-back duplex 350 g, F-flute micro corrugated, E-flute kraft / kraft, E-flute white / kraft, SBS white board 18 pt. Select the stock before checking fit, and ask your converter to confirm the grade and caliper for the intended product.

Which files can I download?

The template page offers dimensioned PDF, Illustrator (.ai via script), layered SVG and DXF cutting and crease geometry. After adding artwork in the editor, you can export a print-ready PDF and review the bleed, safe areas and dieline layers with your printer.

Is this dieline free?

Browsing the previews is free, and you can customize the template after signing in with Google. Template and print-file downloads require a Pro or Business plan. The Free plan allows one eligible download every 8 hours; free mockups, renders and videos carry a watermark. See the pricing page for the current plans.

Can I send the download straight to production?

Use the file as a starting point for a printer or converter review. Confirm the finished dimensions, stock, crease and cutting setup, assembly, bleed and artwork, then approve a physical sample. The 3D preview does not test strength, transit performance or suitability for particular contents.

Compare plans and downloads

Similar structures

Other structures built in a similar way, matched on code family, category, closures and proportions.

All trays & lids templates

Make this three-compartment keepsake insert 236×126×45 yours

Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.